AEKU disposable range charging for experienced users (2025)
AEKU disposable range advice for Singapore, covering charging, what to look for and where the trade-offs actually sit.
Anyone who has compared aeku disposable range options in Singapore quickly learns that specification lists only tell part of the story. Battery behaviour is where the RELX Pro earns its keep: the 800 mAh cell holds a usable charge for most of a day at 40 and recharges over Micro-USB.
The gap between a mid-range and a premium aeku disposable range narrows once you know which components you actually use. Materials are unremarkable on paper and feel reassuringly solid in the hand, with no flex in the body at all.
Worth noting that the magnetic contact takes a small amount of care to keep clean, which we cover in the maintenance section below. For experienced users, the learning curve is shorter than the specification list suggests, and daily use is straightforward from the first charge. If you take one thing from this page, make it the coil compatibility check. A device that needs a coil you cannot source locally becomes an expensive ornament within a month.
Two things to check before ordering: the Micro-USB socket on the base and whether the 1.4 Ω mesh coil is the newer generation. Battery behaviour is where the RELX Pro earns its keep: the 800 mAh cell holds a usable charge for most of a day at 40 and recharges over Micro-USB. If you take one thing from this page, make it the coil compatibility check. A device that needs a coil you cannot source locally becomes an expensive ornament within a month.
The included spare coils are useful for the first fortnight, after which you will be ordering your own. What surprised us most was how little the 1.4 Ω mesh coil changes the draw character compared with the 70:30 PG/VG liquid sitting in the chamber. The Graphite finish hides fingerprints far better than the gloss options, which matters more than it sounds on a device handled daily.
Comparing this against a 70:30 PG/VG setup shows the difference clearly: one favours flavour, the other favours volume. The 2.0 ml capacity is a genuinely useful middle ground: enough liquid for a long session without turning the device into a pocket problem. We would pair the RELX Pro with a 70:30 PG/VG liquid, which is where the balance between throat hit and cloud density sits most comfortably.
Airflow control on the RELX Pro is adjustable enough to move from a warm, restrained draw to something far more open without removing the tank. Vapour production is more than adequate at 40, and pushing beyond that adds heat rather than anything worth carrying. Materials are unremarkable on paper and feel reassuringly solid in the hand, with no flex in the body at all.
Charging over Micro-USB takes about 63 from empty, and the pass-through means the device can be used while plugged in on the smaller batteries. Expect roughly 881 full puffs from a charge at 10 mg/ml, based on average session length in our testing. Delivery across Singapore is typically two to four working days with tracked dispatch, and returns are straightforward within the standard window.
Specifications
Specifications vary by batch, so treat these figures as the reference point rather than a guarantee for every unit.
| Reference model | RELX Pro |
|---|---|
| Brand family | Vaptio |
| Battery capacity | 800 mAh |
| Power range | 40 W |
| Liquid capacity | 2.0 ml |
| Coil | 1.4 Ω mesh |
| Bottle size | 300 ml |
| Liquid ratio | 70:30 PG/VG |
| Nicotine strength | 10 mg/ml |
| Material | zinc alloy |
| Charge port | Micro-USB |
| Connector | magnetic contact |
| Airflow | fixed |
| Mouthpiece | narrow bore |
Flavour and performance notes
A representative profile is Strawberry Cream: creamy, sweet, described as smooth strawberry custard with a light dairy note. On a 70:30 PG/VG ratio this reads clearly on the first day and holds its character to roughly the 1.4 Ω mesh mark before the coil begins to mute it.
Practical considerations in Singapore
Availability in Singapore is the factor that decides most outcomes here. Confirm the 1.4 Ω mesh and the Micro-USB are both in stock before committing, and check that the magnetic contact matches your existing device if you already own hardware. Duty and SGD rates move, so treat prices as current rather than fixed.
Questions about a specific configuration? Send the model name and we will confirm the parts that fit.